::: KOOLGLIDE :::

Remelting the Seam

Most carpet seam complaints are from gaps or overlaps. The KOOLGLIDE System can help.

It takes only a few minutes to make a KOOLGLIDE repair, unlike the old hot irons that take a really long time. Here’s how you do it with KOOLGLIDE:

If you are not happy with the seam just re-activate the tool over the section of the seam that is under the tool. In 8 to 9 seconds the adhesive on the tape will soften. The seam can then be adjusted until you have it the way you like. Finish the seam with your roller and you’re done.

Important! You don’t need to replace the tape. The same tape can be used 3 or 4 times.


Important! Remember to wait 30 seconds or longer between activations.